9

■

Integral power consumption analysis and demand analysis screens

These screens allow you to calculate measurement data and display it in the integral power consumption graph or demand graph.

(Use them to display the maximum demand, average demand, and load ratio values.) Further, you can confirm the power data for a specific interval

using the cursor function.

■

Print function

Print a hard copy of the event list screen, event data screen, ∆V10 screen,

integral power consumption screen, or demand screen, one at a time.

In the TIME PLOT screen, you can collect all of the screens that are

currently open and print them on a single sheet.

Quickly print reports and apply data

■

CSV format conversion function

Convert data displayed in the TIME PLOT or event

waveform screen into CSV format. Converted data can

be used with spreadsheet software on your PC.

Analyze power consumption and demand using acquired data

Cursor

measurement

General power

consumption is

displayed.

Convenient Feature

within that range into CSV format.

A

B

Print example: TIME PLOT screen (U-THD RMS fluctuation) printed on A4 paper

Print example: Event waveform screen printed on A4 paper

■

Downloading from LAN

Data (BINARY/TEXT/BMP) recorded on a PC card or the internal memory of the 3196 can be downloaded via LAN to a personal

■

Report generation function

Choose from 3 types of report generation settings to take care of all the troublesome reporting operations, and either send the data to a

series graph in details for output.)

■

Positive phase, negative phase, and zero phase function

Recalculate event data captured by 3P4W circuits, and display each component of the voltage/current of the positive phase, negative

phase, and zero phase.

■

Model 9624-10 can be used only in conjunction with a hardware license key.

Please select either USB or Parallel license key when ordering.

■

ITIC curve display function

Make ITIC (CBEMA) curve analyses (limit curve) based

on the power quality control standards of the U.S.A.

■

EN50160 display functions

(applicable standard is EN50160:1999)

Effectively evaluate and analyze the quality of power according

to EU standards.

✻

Change the upper or

lower limit of the curve

as desired.