MAAM-007239 datasheet(4/9 Pages) MA-COM

4 / 9 page

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Broadband CATV Single Ended 3-Way Active Splitter

50 - 1100 MHz

Rev. V1

MAAM-007239

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Absolute Maximum Ratings 5,6,7

Parameter

Absolute Maximum

Max Input Power

+12 dBm

Vbias

+10.0 V

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +125°C

Junction Temperature8

150°C

5. Exceeding any one or combination of these limits may cause

permanent damage to this device.

6. M/A-COM does not recommend sustained operation near these

survivability limits.

7. These operating conditions will ensure MTTF > 1 x 106 hours.

8. Junction Temperature (TJ) = TC + (Өjc) * (V*I)

Typical thermal resistance (Өjc) = 42° C/W.

a) For TC = 25°C,

(Low Current Configuration) TJ = 51 °C @ 5 V, 125 mA

(High Current Configuration) TJ = 69 °C @ 5 V, 210 mA

b) For TC= 85°C,

(Low Current Configuration) TJ = 111 °C @ 5 V, 125 mA

(High Current Configuration) TJ = 129 °C @ 5 V, 210 mA

Lead-Free

3 mm 16-Lead PQFN†

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

†

Reference Application Note S2083 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Plating is 100% matte tin over copper.

MAAM-007239 Datasheet(PDF) 4 Page - M/A-COM Technology Solutions, Inc.

MAAM-007239 Datasheet(HTML) 4 Page - M/A-COM Technology Solutions, Inc.

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Download

Link URL