MCP23018 datasheet(33/56 Pages) MICROCHIP

33 / 56 page

DS22103A-page 33

MCP23018/MCP23S18

2.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings (†)

Ambient temperature under bias............................................................................................................ .-40°C to +125°C

Storage temperature .............................................................................................................................. -65°C to +150°C

Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +7.0V

Voltage on RESET with respect to VSS ..................................................................................................... -0.3V to +14V

Voltage on all other pins with respect to VSS (except VDDand GPIOA/B) ...................................... -0.6V to (VDD + 0.6V)

Voltage on GPIO Pins: ................................................................................................................................. -0.6V to 5.5V

Total power dissipation (Note 1)...........................................................................................................................700 mW

Maximum current out of VSS pin ...........................................................................................................................400 mA

Maximum current into VDD pin .............................................................................................................................. 125 mA

Input clamp current, IIK (VI < 0 or VI > VDD)

...................................................................................................................... ±20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)

.............................................................................................................. ±20 mA

Maximum output current sunk by any Output pin....................................................................................................25 mA

Maximum output current sunk by any Output pin (VDD = 1.8V) ..............................................................................10 mA

Maximum output current sourced by any Output pin ..............................................................................................25 mA

Maximum output current sourced by any Output pin (VDD = 1.8V) .........................................................................10 mA

Note:

Power dissipation is calculated as follows:

Pdis = VDD x {IDD -

∑ IOH} + ∑ {(VDD-VOH) x IOH} + ∑(VOL x IOL)

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

MCP23018 Datasheet(PDF) 33 Page - Microchip Technology

MCP23018 Datasheet(HTML) 33 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Download

Link URL