MCP23018T-ESLASHSP datasheet(26/56 Pages) MICROCHIP

Part #	MCP23018T-E/SP

Description	16-Bit I/O Expander with Open-Drain Outputs

PDF	56 Pages

Scroll/Zoom	100%

Manufacturer	MICROCHIP [Microchip Technology]

Direct Link	http://www.microchip.com

Logo

26 / 56 page

MCP23018/MCP23S18

DS22103A-page 26

1.6.8

INTERRUPT FLAG REGISTER

The INTF register reflects the interrupt condition on the

port pins of any pin that is enabled for interrupts via the

GPINTEN register. A ‘set’ bit indicates that the

associated pin caused the interrupt.

This register is ‘read only’. Writes to this register will be

ignored.

INTF – INTERRUPT FLAG REGISTER

R-0

INT7

INT6

INT5

INT4

INT3

INT2

INT1

INT0

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7-0

INT7:INT0: Reflects the interrupt condition on the port. Will reflect the change only if interrupts are

enabled (GPINTEN) <7:0>.

= Pin caused interrupt.

= Interrupt not pending.

MCP23018T-E/SP Datasheet(PDF) 26 Page - Microchip Technology