| Electronic Components Datasheet Search |
|
33784 Datasheet(PDF) 14 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
33784 Datasheet(HTML) 14 Page - Freescale Semiconductor, Inc |
|
14 / 30 page ![]() Analog Integrated Circuit Device Data 14 Freescale Semiconductor 33784 FUNCTIONAL DEVICE OPERATION OPERATIONAL MODES FUNCTIONAL DEVICE OPERATION OPERATIONAL MODES INPUT/OUTPUT PINS There are three I/O pins on the 33784 that can serve as either logic inputs or logic outputs. At power-up or after a Clear Command, the pins default to inputs. They can be individually configured as outputs as needed via the I/O Control Command on the bus. ADDRESSING The 33784 may be connected in a daisy chain to other DBUS devices. If this device is connected in a daisy chain, then it will receive its 4-bit address during initialization on the bus. TEST MODE The 33784 can be configured in a special test mode for evaluation purposes. The test mode can only be entered if all of the following conditions are true: • The TEST1 pin is at a logic high level • The correct test mode command is sent to the device on the bus • One of the internal test mode registers is accessed Accessing the test mode registers and writing different values to them can change the behavior of many of the pins on the device, including the TOUT pin, which is only active in test mode. The test mode can be intermixed with other bus commands to evaluate the behavior of internal circuit blocks. To prevent accidental activation of the test mode, the TEST1 pin should be tied externally to AGND. The TOUT pin should be grounded when not in TEST mode. Table 5. 10-Bit ADC Value Mapping Hex Description 03FF Prohibited • • • • • • 03F9 Prohibited 03F8 Error Code 03F7 Prohibited • • • • • • 03E4 Prohibited 03E3 G Range • • • • • • 0020 G Range 001F Prohibited • • • • • • 0000 Prohibited Table 6. 8-Bit ADC Value Mapping Hex Description FF Prohibited FE Error Code FD Prohibited •• •• •• FA Prohibited F9 Prohibited F8 G Range •• •• •• 08 G Range 07 Prohibited •• •• •• 02 Prohibited 01 Prohibited 00 Prohibited Table 6. 8-Bit ADC Value Mapping Hex Description |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |