AD2C101

1 Form A

Solid State Relay

The AD2C101 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The relay consists of an IR LED

optically coupled to a Photo Diode Array, which in turn drives two output MOSFETs. The AD2C101 provides high load voltage (600V) and

high input-to-output isolation (5kV) in a miniature 4 pin DIP / SMD package, making it ideal for high-density board applications.

DESCRIPTION

FEATURES

APPLICATIONS

OPTIONS/SUFFIXES*

SCHEMATIC DIAGRAM

ABSOLUTE MAXIMUM RATINGS*

APPROVALS

High Blocking Voltage (600V)

•

Small 4-pin DIP / SMD package

•

High input-to-output isolation (5000Vrms)

•

100mA maximum continuous load current

•

40 ohms maximum on-resistance

•

Long life/high reliability

•

Multiplexers

•

Meter reading systems

•

Data Acquisition

•

Medical equipment

•

Battery monitoring

•

Home/Safety security systems

•

Surface Mount Option (65 pcs / tube)

Tape and Reel Option (2000 pcs / reel)

.04" (10.16mm) lead spacing (VDE0884)

NOTE: Suffixes listed above are not included in marking on

device for part number identification.

PARAMETER

UNIT

MIN

TYP

MAX

Storage Temperature

°C

-40

150

Operating Temperature

°C

-40

85

Continuous Input Current

mA

50

Transient Input Current

(1us)

mA

400

Reverse Input Control

Voltage

V

5

Output Power Dissipation

mW

500

Solder Temperature -

Wave (10s)

°C

260

Solder Temperature - IR

Reflow (10s)

°C

260

*The values indicated are absolute stress ratings. Functional operation of the

device is not implied at these or any conditions in excess of those defined in

electrical characteristics section of this document. Exposure to Absolute

Ratings may cause permanent damage to the device and may adversely

affect reliability.

•

www.ssousa.com • +1.408.293.4600

Page 1 of 5

AD2C101

rev 1.42 (5/15/2008)

© 2008 Solid State Optronics • San José, CA

1

+ INPUT

- INPUT

LOAD

LOAD

2

4

3

UL / C-UL Approved: File E201932