AD9393SLASHPCBZ datasheet(30/40 Pages) AD

30 / 40 page

AD9393

Rev. 0 | Page 30 of 40

0xC8—Bit[6], ISRC1 Valid

This bit is an indication of whether the ISRC1 packet bytes are

valid. 0 = ISRC1 status bits and PBs not valid. 1 = ISRC1 status

bits and PBs valid.

0xC8—[2:0], ISRC Status

These bits define where in the ISRC track the samples are. At

least two transmissions of 001 occur at the beginning of the

track, while continuous transmission of 010 occurs in the

middle of the track, followed by at least two transmissions of

100 near the end of the track.

0xCF—Bits[6:0], New Data Flags

See the 0x87—Bits[6:0], New Data Flags (NDF) section for a

description.

0xD7—Bits[6:0], New Data Flags

See the 0x87—Bits[6:0], New Data Flags (NDF) section for a

description.

0xDC—Bits[7:0], ISRC2 Packet Byte 0 (ISRC2_PB0)

This is transmitted only when the ISRC continued bit

(Register 0xC8 Bit 7) is set to 1.

0xDF—Bits[6:0], New Data Flags

See the 0x87—Bits[6:0], New Data Flags (NDF) section for a

description.

0xE7—Bits[6:0], New Data Flags

See the 0x87—Bits[6:0], New Data Flags (NDF) section for a

description.

AD9393/PCBZ Datasheet(PDF) 30 Page - Analog Devices