LSIR3333SLASHTRS datasheet(8/9 Pages) LIGITEK

Part #	LSIR3333/TRS

Description	INFRARED EMITTING DIODES

PDF	9 Pages

Scroll/Zoom	100%

Manufacturer	LIGITEK [LIGITEK electronics co., ltd.]

Direct Link	http://www.ligitek.com

Logo

8 / 9 page

Anode side(cathode side on GaAlAs chips)

2. The LED lamps are designed for high-density mount-

ing and have a structure which can alleviate mechan-

ical stress due to clinching . Nevertheless , take care

to avoid the occurrence of residual mechanical stress

due to clinching .

LIGITEK ELECTRONICS CO.,LTD.

Property of Ligitek Only

Mounting:

1. If the leads are subjected to stress during soldering

a printed circuit board, illumination failure may result

immediately or later during use. For this reason,

make sure that the intervals between the installation

holes in the board are equal to the intervals between

the leads (after forming if done) so that no stress is

applied to the lead.

(O)

(X)

Page 7/8

PART NO.

LSIR3333/TRS

LSIR3333/TRS Datasheet(PDF) 8 Page - LIGITEK electronics co., ltd.