Optoway

SPS-93100FG

***********************************************************************************************************************************************************************

***********************************************************************************************************************************************************************

Tel: 886-3-5979798

Fax: 886-3-5979737

E-mail: sales@optoway.com.tw

http: // www.optoway.com.tw

1/1/2008 V2.0

1

SPS-93100FG / SPS-93100BFG / SPS-93100AFG

(RoHS Compliant)

3.3V / 1550 nm / 2.125 Gbps LC SFP SINGLE-MODE TRANSCEIVER

*********************************************************************************************************************************************************************

FEATURES

l Hot-Pluggable SFP Footprint LC Optical Transceiver

l Small Form-Factor Pluggable (SFP) MSA compatible

l Compliant with Fibre Channel 1X/2X SM-LC-L FC-PI

l Compliant with IEEE 802.3z 1000BASE

l 1550 nm DFB LD Transmitter

l 28 dB Power Budget at Least

l AC/AC Coupling according to MSA

l Single +3.3 V Power Supply

l RoHS Compliant

l Class 1 Laser International Safety Standard IEC 60825

Compliant

APPLICATIONS

l ATM Switches and Routers

l SONET / SDH Switch Infrastructure

l XDSL Applications

l Metro Edge Switching

DESCRIPTION

The SPS-93100FG series single mode transceivers is small

form factor pluggable module for bi-directional serial

optical data communications such as Gigabit Ethernet and

Fiber Channel 1x/2x SM-LC-L FC-PI. It is with the SFP

20-pin connector to allow hot plug capability. This module

is designed for single mode fiber and operates at a nominal

wavelength of 1550 nm. A guaranteed minimum optical

link budget of 28 dB is offered which can correspond to a

link distance of over 100 km (assuming worst case fiber loss

of 0.23 dB/km). The transmitter section uses a multiple

quantum well 1550 nm DFB laser and is a class 1 laser

compliant according to International Safety Standard

IEC-60825. The receiver section uses an integrated InGaAs

detector preamplifier (IDP) mounted in an optical header

and a limiting post-amplifier IC.

LASER SAFETY

This single mode transceiver is a Class 1 laser product. It

complies with IEC 60825 and FDA 21 CFR 1040.10 and

1040.11.

The transceiver must be operated within the

specified temperature and voltage limits. The optical ports

of the module shall be terminated with an optical connector

or with a dust plug.

ORDER INFORMATION

P/No.

Bit Rate

(Gb/s)

FC-PI

Distance

(km)

Wavelength

(nm)

Package

Temp.

(

TX Power

(dBm)

RX Sens.

(dBm)

RoHS

Compliant

SPS-93100FG

2.125/1.063

200/100

100

1550 DFB

LC SFP

0 to 70-

5 to 0

-28

Yes

SPS-93100BFG

2.125/1.063

200/100

100

1550 DFB

LC SFP

-10 to 85-

5 to 0

-28

Yes

SPS-93100AFG

2.125/1.063

200/100

100

1550 DFB

LC SFP

-40 to 85-

5 to 0

-28

Yes

Absolute Maximum Ratings

Parameter

Symbol

Min

Max

Units

Notes

Storage Temperature

Tstg

-40

85

Operating Case Temperature

Topr

0

70

Air flow 1m/sec

Power Supply Voltage

Vcc

-0.5

3.6

V

Recommended Operating Conditions

Parameter

Symbol

Min

Typ

Max

Units / Notes

Power Supply Voltage

Vcc

3.13

3.3

3.47

V

Operating Case Temperature

Topr

0

70

Power Supply Current

230

300

mA

Data Rate

1000

2125

Mb/s