| Electronic Components Datasheet Search |
|
CS4294/CS4298 Datasheet(PDF) 63 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4294/CS4298 Datasheet(HTML) 63 Page - Cirrus Logic |
|
63 / 66 page ![]() CS4202 DS549PP2 63 Interchannel Isolation The amount of 1 kHz signal present on the output of the grounded AC-coupled line input channel with 1 kHz, 0 dB, signal present on the other line input channel. Units are in dB. Line-level Refers to a consumer equipment compatible, voltage driven interface. The term implies a low driver impedance and a minimum 10 k Ω load impedance. PATHS A-D: Analog in, through the ADCs, onto the serial link. D-A: Serial interface inputs through the DACs to the analog output. A-A: Analog in to Analog out (analog mixer). PC 99 Refers to the PC 99 System Design Guide published by the Microsoft® Corporation [7]. PC 2001 Refers to the PC 2001 System Design Guide published by the Microsoft® Corporation [8]. PLL Phase Lock Loop. Circuitry for generating a desired clock from an external clock source. Resolution The number of bits in the output words to the DACs, and in the input words to the ADCs. Signal to Noise Ratio (SNR) SNR, similar to DR, is the ratio of an arbitrary sinusoidal input signal to the RMS sum of the noise floor, in the presence of a signal. It is measured over a 20 Hz to 20 kHz bandwidth with units in dB. S/PDIF Sony/Phillips Digital Interface. This interface was established as a means of digitally interconnecting consumer audio equipment. The documentation for S/PDIF has been superseded by the IEC-958 consumer digital interface document. SRC Sample Rate Converter. Converts data derived at one sample rate to a differing sample rate. The CS4202 operates at a fixed sample frequency of 48 kHz. The internal sample rate converters are used to convert digital audio streams playing back at other frequencies to 48 kHz. Total Harmonic Distortion plus Noise (THD+N) THD+N is the ratio of the RMS sum of all non-fundamental frequency components, divided by the RMS full-scale signal level. It is tested using a -3 dB FS input signal and is measured over a 20 Hz to 20 kHz bandwidth with units in dB FS. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |