B146

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

DF1E Series

8. Various Applications

With the same series, various applications can

be used for the board solder dip type and in-

line.

9. Listed by UL, C-UL

Electronic equipment, office machines,

industrial

equipment,

and

consumer

equipment, and so on

■Features

1. Full Lock Function Added

The inner lock system adopts a full lock mechanism.

This mechanism prevents disengagement to occur due to

an unexpected external shock. (Refer to photo 1)

2. Increase in Crimping Contact Fixation Force and

Semi-insertion Prevention

The double lock is activated for the use method to give a

stress to the cable, to increase crimping contact fixation

force, and to prevent the semi-insertion of the crimping

contact. (Refer to photo 2)

3. Mold Lance Adopted

Since the contact lance may be deformed involving in the

contact after the crimping process, the mold lance has been

adopted.

4. Mis-insertion Prevention

Equipped with the mechanism to completely prevent reverse

insertion and insertion between dissimilar contacts.

5. Means to Prevent Solder Crack

The glass enforcement resin is adopted for the pin header to

prevent a solder crack to occur due to heat compression.

6. Correspond to Potting

Corresponding to potting, the pin header is provided for

product variations.

Corresponding to potting up to 8mm and mounting height

19.8mm (no retainer), the low profile is achieved.

7. Production Facility Cost Reduction

The female crimping contact uses the DF1B series crimping

contact, which has been conventionally marketed.

Investment for new facilities isn't needed. However, if the

retainer is installed in the cable with AWG#22 or more wire,

use the DF1E crimping contact. The female crimping

contact for in-line is used together with the DF1B applicator.

Therefore, no investment is needed for new facilities.

Full lock function

added

Photo 2

Photo 1

Double lock

engaged

Inner-lock system

full lock mechanism

Mis-insertion

prevention

Double lock

engaged

UL, C-CL Listed

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.