DS882DB1

21

CDB42L73

4.3.8

Output DSP Tab

The “Output DSP” tab contains the main controls for setting the digital signal processing applied to the

analog outputs of the CS42L73. A brief description of each control group is described below.

• Digital Volume - register controls to configure the digital volume of the audio routed to the peak detect

and limiter circuitry prior to the analog outputs

• Peak Detect and Limiter - register controls to configure the peak detection and limiter functions applied

to the analog outputs

• Refresh Page - reads all registers in all devices and updates the values in the GUI

• Reset CS42L73 - resets the CS42L73

Figure 13. The “Output DSP” Tab in FlexGUI for the CDB42L73