Document Number: 28138

www.vishay.com

Revision: 31-Aug-09

317

MKP 339 X2

Interference Suppression Film Capacitors

MKP Radial Potted Type

Vishay BCcomponents

APPROVALS

MOUNTING

Normal Use

The capacitors are designed for mounting on printed circuit boards. The capacitors packed in bandoliers are designed for

mounting in printed-circuit boards by means of automatic insertion machines.

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed-circuit

board:

• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads

• For larger pitches the capacitors shall be mounted in the same way and the body clamped.

Space Requirements on Printed-Circuit Board

The maximum length and width of film capacitors is shown in the drawing:

• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned

• Product height with seating plane as given by “IEC 60717”

Storage Temperature

• Storage temperature: T

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86

to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

SAFETY APPROVALS X2

VOLTAGE

VALUE

FILE NUMBERS

EN

60384-14 (ENEC)

(= IEC

60384-14 ed-3)

310 Vac

1 nF to 4.7 µF

FI 2008038

UL1414 and CSA-C22.2 No. 1

250 Vac

1 nF to 1 µF

E112471

UL1283

305 Vac

1 nF to 4.7 µF

E109565

CSA-E384-14

310 Vac

1 nF to 4.7 µF

2123580

CQC

310Vac

1 nF to 4.7 µF

CQC 07001021281 (L)

CQC03001006960 (s)

CQC 06001018290 (F)

CB Test Certificate

310 Vac

1 nF to 4.7 µF

FI 5123

The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the

ENEC-Agreement): Austria; Belgium; Czech.Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;

Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.

16

®

CQC

b

l

l + 0.3 mm

Eccentricity