PC312XDP512F0CFVR datasheet(654/1348 Pages) FREESCALE

654 / 1348 page

Chapter 18 Memory Mapping Control (S12XMMCV3)

MC9S12XDP512 Data Sheet, Rev. 2.21

654

Freescale Semiconductor

18.1.4.2

Functional Modes

•

Single chip modes

In normal and special single chip mode the internal memory is used. External bus is not active.

•

Expanded modes

Address, data, and control signals are activated in normal expanded and special test modes when

accessing the external bus. Access to internal resources will not cause activity on the external bus.

•

Emulation modes

External bus is active to emulate, via an external tool, the normal expanded or the normal single

chip mode.

18.1.5

Block Diagram

Figure 18-11 shows a block diagram of the MMC.

Figure 18-1. MMC Block Diagram

18.2

External Signal Description

The user is advised to refer to the SoC Guide for port conﬁguration and location of external bus signals.

Some pins may not be bonded out in all implementations.

Table 18-2 and Table 18-3 outline the pin names and functions. It also provides a brief description of their

operation.

1. Doted blocks and lines are optional. Please refer to the Device User Guide for their availlibilities.

Peripherals

FLASH

XGATE

CPU

BDM

Target Bus Controller

DBG

EEPROM

EBI

MMC

Address Decoder & Priority

RAM

FLEXRAY

PC312XDP512F0CFVR Datasheet(PDF) 654 Page - Freescale Semiconductor, Inc