DS1230Y/AB

3 of 10

PACKAGES

The DS1230 devices are available in two packages: 28-pin DIP and 34-pin PowerCap Module (PCM).

The 28-pin DIP integrates a lithium battery, an SRAM memory and a nonvolatile control function into a

single package with a JEDEC-standard, 600-mil DIP pinout. The 34-pin PowerCap Module integrates

SRAM memory and nonvolatile control along with contacts for connection to the lithium battery in the

DS9034PC PowerCap. The PowerCap Module package design allows a DS1230 PCM device to be

surface mounted without subjecting its lithium backup battery to destructive high-temperature reflow

soldering. After a DS1230 PCM is reflow soldered, a DS9034PC PowerCap is snapped on top of the

PCM to form a complete Nonvolatile SRAM module. The DS9034PC is keyed to prevent improper

attachment. DS1230 PowerCap Modules and DS9034PC PowerCaps are ordered separately and shipped

in separate containers. See the DS9034PC data sheet for further information.