2

ICS9147-22

Pin Descriptions

PIN NUMBER

PIN NAME

TYPE

DESCRIPTION

1

REF1

OUT

Reference clock output

2

REF0

OUT

Reference clock output

3, 10, 17, 24, 31,

31, 37, 43

GND

PWR

Ground (common)

4X1

IN

Crystal or reference input, nominally 14.318 MHz. Includes

internal load cap to GND and feedback resistor from X2.

5

X2

OUT

Crystal output, includes internal load cap to GND.

6, 47

N/C

-

Pins are not internally connected

7, 15

VDD2

PWR

Supply for PCICLKF, and PCICLK (0:5)

8

PCICLK_F

OUT

Free running PCI clock

9, 11, 12, 13, 14, 16

PCICLK (0:5)

OUT

PCI clocks

18

FS0

IN

Frequency select 0 input

1

19

FS1

IN

Frequency select 1 input

1

20

FS2

IN

Frequency select 2 input

1

21

VDD4

PWR

Supply for 48MHz and 24MHz clocks

22

48MHz

OUT

48MHz driver output for USB clock

23

24MHz

OUT

24MHz driver output for Super I/O clock

25, 28,34

VDD3

PWR

Supply for SDRAM (0:7)

26, 27, 29, 30,

32, 33, 35, 36

SDRAM (0:7)

OUT

SDRAMs clock at CPU speed

38, 39, 41, 42

CPUCLK (0:3)

OUT

CPUCLK clock output, powered by VDDL

40, 46

VDDL

PWR

Supply for CPUCLK (0:3) + IOAPIC

44

PD#

IN

Power down stops all clocks low and disables oscillator and

internal VCO’s.

2

45

IOAPIC

OUT

IOAPIC clock output, powered by VDDL at crystal frequency

48

VDD1

PWR

Supply for REF (0:1), X1, X2

Note 1: Internal pull-up resistor of nomimally 100K to 120K at 3.3V on indicated inputs.

Note 2: The PD# input pin has a protection diode clamp to the VDDL power supply. If VDDL is not connected to VDD, (ie

VDDL=2.5V, VDD=3.3V) then this input must have a series resistor if the logic high is connected to VDD. This input

series resistor provides current limit for the clamp diode. For a pullup to VDD it should be 1Kohm or more from the PD#

pin to VDD. If the PD# pin is being driven by logic powered by 3.3V, then a 100Ω series resistor will be suffcient.