For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

7

7 - 1

HMC719LP4 / 719LP4E

GaAs PHEMT MMIC HIGH IP3

LOW NOISE AMPLIFIER, 1.3 - 2.9 GHz

v04.0610

General Description

Features

Functional Diagram

Typical Applications

parameter

Vdd = +3V

Vdd = +5V

Units

min.

Typ.

max.

min.

Typ.

max.

min.

Typ.

max.

min.

Typ.

max.

frequency range

1.3 - 2.2

2.2 - 2.9

1.3 - 2.2

2.2 - 2.9

GHz

Gain

27

32

22

26.5

29

35

24

28

dB

Gain Variation over Temperature

0.02

0.02

0.02

0.02

dB/ °C

Noise figure

1.0

1.3

1.3

1.6

0.95

1.2

1.25

1.6

dB

input return loss

16

13.5

17.5

16.5

dB

output return loss

10.5

9.5

13.5

11.5

dB

output power for 1 dB

Compression (p1dB)

12.5

15.5

12.5

15.5

18

21.5

18

21.5

dBm

saturated output power (psat)

18

18.5

23

23

dBm

output Third order intercept (ip3)

32

31

39

39

dBm

Total supply Current (idd)

187

220

187

220

272

315

272

315

mA

* rbias resistor sets current, see application circuit herein, Vdd = Vdd1 = Vdd2

The HmC719lp4(e) is a GaAs pHemT mmiC

low Noise Amplifier that is ideal for Cellular/3G and

lTe/wimAX/4G

basestation

front-end

receivers

operating between 1.3 and 2.9 GHz. The amplifier

has been optimized to provide 1.0 dB noise figure,

34 dB gain and +39 dBm output ip3 from a single

supply of +5V. input and output return losses are

excellent and the lNA requires minimal external

matching and bias decoupling components. The

HmC719lp4(e) shares the same package and pinout

with the HmC718lp3(e) 600 - 1400 mHz lNA. The

HmC719lp4(e) can be biased with +3V to +5V and

features an externally adjustable supply current

which allows the designer to tailor the linearity

performance of the lNA for each application.

Noise figure: 1.0 dB

Gain: 34 dB

output ip3: +39 dBm

single supply: +3V to +5V

50 ohm matched input/output

The HmC719lp4(e) is ideal for:

• Cellular/3G and lTe/wimAX/4G

• BTs & infrastructure

• repeaters and femtocells

• Access points

• Test equipment & military