Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of

Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,

fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental

damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-PD2401-R12

©Copyright 2010, Clare, Inc.

All rights reserved. Printed in USA.

8/6/2010

For additional information please visit our website at: www.clare.com

5

PD2401

MECHANICAL DIMENSIONS

Dimensions

mm

(inches)

PCB Hole Pattern

7.620 ± 0.254

(0.300 ± 0.010)

9.144 ± 0.508

(0.360 ± 0.020)

0.254 TYP

(0.010 TYP)

7.239 TYP

(0.285 TYP)

6.350 ± 0.127

(0.250 ± 0.005)

19.202 ± 0.381

(0.756 ± 0.015)

17.780 ± 0.127

(0.700 ± 0.005)

15.240 ± 0.127

(0.600 ± 0.005)

0.457 ± 0.076

(0.018 ± 0.003)

2.540 ± 0.127

(0.100 ± 0.005)

3.302 ± 0.051

(0.130 ± 0.002)

4.064 TYP

(0.160 TYP)

Pin 1

Pin 16

0.559 ± 0.102

(0.022 ± 0.004)

Pin 1

Pin 16

17.780

(0.700)

15.240

(0.600)

7.620

(0.300)

0.800 DIA x 4

(0.031 DIA x 4)

PD2401