●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.

●Please request for a specification sheet for detailed product data prior to the purchase.

●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

9653TCAVOL14E1109E0

E/SV Series

33

í PERFORMANCE CHARACTERISTICS

Test Conditions : Conform to IEC 60384-1

at 85℃

at 125℃

at 85℃

at 120 Hz

at 100 kHz

solder dip : 260℃, 5sec

solder reflow : 260℃,10sec

25V

16V

33V

35V

22V

46V

16V

10V

20V

20V

13V

26V

6.3V

4V

8V

10V

6.3V

13V

2.5V

1.6V

3.3V

4V

2.5V

5.2V

Lower than 2 times initial

specification (P, J case) or 1.25

times initial specification

Parts shall be temperature cycled

over a temperature range of –55 to

+125℃, five times continuously as

follow.

Step 1: –55 ℃, 30±3min.

Step 2: room temp. 10 to 15min.

Step 3: 125 ℃, 30±3min.

Step 4: room temp, 10 to 15min.

Refer to Standard Ratings

at 40℃

at 90 to 95% RH

500 hour

at 85℃: Rated voltage

at 125℃: Derated voltage

2000 hour

Strength : 4.9N

Time : 10±0.5sec.

(two directions)

0.125C • V( A) or 6.25 A,

which ever is greater

Lower than initial

specification

Lower than initial

specification

PERFORMANCE

TEST CONDITION

Operating temperature

Rated voltage (V.dc)

Derated voltage (V.dc)

Surge voltage (V.dc)

Capacitance

Capacitance tolerance

DC Leakage Current (L.C)

Dissipation Factor

Equivalent Series Resistance

–55℃ to +125℃

ITEM

Surge voltage test

0.47

F to 680

F

L.C

Refer to Standard Ratings

Refer to Standard Ratings

Refer to Standard Ratings

at 120 Hz

±20% or ±10% (P,J case: ±20%)

Visual:

There shall be no evidence of mechanical damage

Refer to Standard Ratings

Refer to Standard Ratings

Refer to Standard Ratings

at 85℃: Rated voltage

at 125℃: Derated voltage

2000 hour

Lower than initial

specification

Lower than initial

specification

Endurance

Damp heat

Failure Rate

Terminal Strength

Conform to IEC60384–1

Conform to IEC60384–1

Others

Lower than 1.5 times initial

specification

Voltage:

Rated voltage for 5min.

Temperature : 85±2℃

Applied voltage : Surge voltage

Series resistance : 33 ohm

Duration of surge : 30±5 sec

Time between surge : 5.5min.

Number of cycle : 1000

0.01C • V( A) or 0.5

A , whichever is greater

Lower than initial

specification

Lower than initial

specification

Capacitance change

DF(%)

Lower than initial

specification

Rapid change of

temperature

Resistance to Soldering

heat

Characteristic

at high and low

temperature

Lower than initial

specification

–55℃

+85℃

+125℃

Not to exceed –20% (P, J case)

or –12%

Not to exceed +20% (P, J case)

or +12%

Lower than initial

specification

Refer to Standard Ratings

Refer to Standard Ratings

Not to exceed +20% (P, J case)

or +15%

0.1C • V( A) or 5 A,

which ever is greater

Step 1: 25±2℃

Step 2: –55

℃

Step 3: 25±2℃

Step 4: 125

℃

0

–3

0

–3

0

–3

0

–3

————

Derated voltage at 85℃ at more

40

Reference : Derated voltage (85 to 125

°C)

°C

T : Operating temperature

(T–85)