SS12SDP2 datasheet(11/34 Pages) TI1

Part #	SS12SDP2

Description	Contains all support circuitry needed for the ADS1148/ADS1248

PDF	34 Pages

Scroll/Zoom	100%

Manufacturer	TI1 [Texas Instruments]

Direct Link	http://www.ti.com

Logo

11 / 34 page

www.ti.com

ADS1248EVM-PDK Kit Operation

Figure 7. Connecting ADS1248EVM to MMB3

CAUTION

Do not misalign the pins when plugging the ADS1248EVM into the MMB3.

Check the pin alignment carefully before applying power to the PDK.

Step 4.

Set the jumpers and switches on the ADS1248EVM as shown in Figure 3 (note that these

settings are the factory-configured settings for the EVM).

8.2.1

About the MMB3

The MMB3 is a Modular EVM System motherboard. It is designed around the MSP430F449, a low-power

microcontroller from Texas Instruments. Figure 8 shows a block diagram of the MMB3.

SBAU142B

– April 2009 – Revised May 2011

ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

Submit Documentation Feedback

SS12SDP2 Datasheet(PDF) 11 Page - Texas Instruments