| Electronic Components Datasheet Search |
|
PIC24E Datasheet(PDF) 17 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC24E Datasheet(HTML) 17 Page - Microchip Technology |
|
17 / 30 page ![]() Hardware © 2010-2011 Microchip Technology Inc. DS51936B-page 17 2.2.5 Switches Push button switches (SW1, SW2 and SW3) provide the following functionality: • SW1: Active-low switch connected to RD6 • SW2: Active-low switch connected to RD7 • SW3: Active-low switch connected to RD13 The switches do not have any debounce circuitry and require the use of software debounce techniques. When idle, the switches are pulled high (+3.3V). When pressed, they are grounded. 2.2.6 LEDs The LEDs (LED1, LED2 and LED3) are connected to PORT D of the processor: • LED1: Active-high LED connected to RD0 • LED2: Active-high LED connected to RD1 • LED3: Active-high LED connected to RD2 The corresponding PORT D pins must be configured as digital outputs and set high in order to turn on the LEDs. 2.2.7 Oscillator Options The installed DSC or MCU has an 8 MHz crystal (Y3) connected to it. This crystal is used by the microcontroller’s Primary Oscillator. Use of the external crystal is required in order to develop USB applications, as the USB specification dictates a frequency tol- erance of ± 0.25% for full speed. Non-USB applications can use the internal oscillators if preferred. The starter kit also has provisions for an external Secondary Oscillator (Y2); however, the crystal for this oscillator is not populated. The PIC24FJ256GB106 device is independently clocked and has its own 12 MHz crystal (Y1). 2.2.8 120-pin Modular Expansion Connector The dsPIC33E or PIC24E USB Starter Kit includes a 120-pin modular expansion interface (Application Board Connector J3) on its bottom side. This allows the board to be optionally used in conjunction with other Microchip development boards such as the I/O Expansion Board or the Multimedia Expansion Board (MEB), thereby extending the functionality provided by the starter kit. TABLE 2-1: STARTER KIT CONNECTOR PART NUMBERS Connector HIROSE Electric P/N Starter Kit Connector FX10A-120P/12-SV1(71) Application Board Connector FX10A-120S/12-SV(71) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |