Triaxial Analog Accelerometer

•

output of the XL203A is directly proportional to the acceleration

along the axes. Each DC-coupled sensor output is fully scaled,

referenced, and calibrated.

•

and can be used in harsh environments. The machined 6061-T6

aluminum case has a black anodized finish per MIL-A-8625,

plus the shielded cable has a high-temperature PVC jacket and

Teflon-insulated conductors. The unit has resilient power and will

survive 5000 g powered and unpowered.

•

less than one cubic inch.

•

from +8.5 to +36 Volts is all that is required to measure accelera-

tion and temperature.

Rugged, Small, ±6 g or ±15 g

The XL203A is ready when you are. In stock and ready to ship, you can be taking measurements in less time

than with built-to-order accelerometers.

The small size and built-in power regulation allow the XL203A to fit where other accelerometers can’t. Choose

bandwidth of 100 Hz or 800 Hz and range options of ±6g or ±15g to measure accelerations on three axes.

The accelerometers have a nominal full scale output swing of ±2 Volts. The zero g output level is nominally

+2.5 Volts. Precise values are available on the included calibration certificate.

•

calibration certificate listing sensitivity and offset, as well as the

on-axis and transverse alignment parameters needed to ensure

rapid and efficient system implementation. The alignment data

can be used to compensate the measured values if needed.

•

acceleration to be injected into the accelerometer to verify chan-

nel integrity and wiring connections.

•

makes it easy to wire. Four tapped holes simplify mounting, and

optional mounting adapters are also available.

•

environmentally safe while API Technologies’ assembly process

ensures reliable functionality. Fully potted electronics eliminates

the possibility of tin whiskers-related failures.

•

come with a three-year factory warranty.

XL203A

*Technical Data subject to change without notice

PRELIMINARY