| Electronic Components Datasheet Search |
|
PCM1716E/2K Datasheet(PDF) 8 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
PCM1716E/2K Datasheet(HTML) 8 Page - Texas Instruments |
|
8 / 18 page ![]() ® 8 PCM1716 1024 system (XTI) clocks Reset Reset Removal XTI Clock Internal Reset RST t RST (1) NOTE: (1) t RST = 20ns min. 1024 system (= XTI) clocks Reset Reset Removal V CC = VDD Internal Reset XTI Clock FIGURE 5. Internal Power-On Reset Timing. FUNCTIONAL DESCRIPTION PCM1716 has several built-in functions including digital attenuation, digital de-emphasis, input data format selection, and others. These functions are software controlled. PCM1716 can be operated in two different modes, software mode or hardware mode. Software mode is a three-wire interface using pin 28 (ML), 27 (MC), and 26 (MD). PCM1716 can also be operated in hardware mode, where static control signals are used on pin 28 (115, pin 27 (DM1), pin 26 (DM0) and pin 23 (IWO). This basic operation mode as software or hardware can be selected by pin 24 (MODE) as shown in Table II. MODE (pin 24) = H Software Mode MODE (pin 24) = L Hardware Mode TABLE II. Mode Control. Table III indicates which functions are selectable within the users chosen mode. All of the functions shown are selectable within the software mode, but only de-emphasis control, soft mute and input data format may be selected when using PCM1716 in the hardware mode. SOFTWARE HARDWARE FUNCTION (Mode = H) (Mode = L) Input Data Format Selection O O Input Data Bit Selection O O Input LRCIN Polarity Selection O X De-emphasis Control O O Mute O O Attenuation O X Infinity Zero Mute Control O X DAC Operation Control O X Slow Roll-Off Selection O X Output Phase Selection O X CLKO Output Selection O X NOTE: O = Selectable, X: Not Selectable. TABLE III. Mode Control, Selectable Functions. HARDWARE MODE (MODE = L) In hardware mode, the following function can be selected. De-emphasis control De-emphasis control can be selected by DM1 (pin 27) and DM0 (pin 26) FIGURE 6. External Forced Reset Timing. Not Recommended For New Designs |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |