STM32F372VC datasheet(18/128 Pages) STMICROELECTRONICS

18 / 128 page

Functional overview

STM32F37x

18/128

Doc ID 022691 Rev 3

3.13

16-bit sigma delta analog-to-digital converters (SDADC)

Up to three 16-bit sigma-delta analog-to-digital converters are embedded in the

STM32F37x. They have up to two separate supply voltages allowing the analog function

voltage range to be independent from the STM32F37x power supply. They share up to 21

input pins which may be configured in any combination of single-ended (up to 21) or

differential inputs (up to 11).

The conversion speed is up to 16.6 ksps for each SDADC when converting multiple

channels and up to 50 ksps per SDADC if single channel conversion is used. There are two

conversion modes: single conversion mode or continuous mode, capable of automatically

scanning any number of channels. The data can be automatically stored in a system RAM

buffer, reducing the software overhead.

A timer triggering system can be used in order to control the start of conversion of the three

SDADCs and/or the 12-bit fast ADC. This timing control is very flexible, capable of triggering

simultaneous conversions or inserting a programmable delay between the ADCs.

Up to two external reference pins (VREFSD+, VREFSD-) and an internal 1.2/1.8 V

reference can be used in conjunction with a programmable gain (x0.5 to x32) in order to

fine-tune the input voltage range of the SDADC.

STM32F372VC Datasheet(PDF) 18 Page - STMicroelectronics