2

■

Specifications

Ratings

Current rating

0.2 A

Operating

temperature range

-55 to +85°C (Note 1)

Storage

temperature range

-10 to +50°C (Note 2)

Voltage rating

30 Vrms AC

Operating

humidity range

Relative humidity 90% max.

(No condensation)

Storage

humidity range

Relative humidity 90%

max. (No condensation)

Recommended FPC Thickness

0.2 ± 0.02 mm, Gold plated contact pads

Item

Specification

Conditions

1. Insulation resistance 50 Mø min.

100 V DC

2. Withstanding voltage

No flashover or insulation breakdown

90 Vrms AC / one minute

3. Contact resistance

100 mø max.

* Including FPC conductor resistance

1 mA, AC max (AC: 1kHz)

4. Durability

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

10 cycles

5. Vibration

No electrical discontinuity of 1μs or longer

No damage, cracks, or parts dislocation

Frequency: 10 to 55 Hz, single amplitude of 0.75mm,

10 cycles in each of the 3 axis

6. Shock

No electrical discontinuity of 1μs or longer

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

Acceleration of 981m/s

3 cycles in each of the 3 axis

7. Humidity

(Steady state)

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

96 hours at 40°C and humidity of 90 to 95%

8. Temperature cycle

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

Temperature : -55°C → +15°C to +35°C → +85°C→ +15°C to +35°C

Time: 30 → 2 to 3 → 30 → 2 to 3 minutes

5 cycles

9. Resistance to

soldering heat

No deformation of components affecting performance

Reflow: At the recommended temperature profile

Manual soldering: 350°C ±10°C for 5 seconds

Note 1. Includes temperature rise caused by current flow.

Note 2. The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or

during transportation after board mounting.

Note 3. Information contained in this catalog represents general requirements for this Series.

Contact us for the drawings and specifications for a specific part number shown.

■

Materials

Part

Material

Finish

Remarks

Insulator

LCP

Color:Beige

UL94V-0

PA

Color:Black

Contacts

Phosphor bronze

Gold plated

---------

Metalfittings

Pure tin reflow plated

---------

■

Ordering information

FH 43B − 51S − 0.2 SHW (10)

1

2

3

4

5

6

5

Termination type :

SHW…SMT horizontal staggered row mount type

6

Plating specifications

(10)…Gold plating with nickel barrier

1

Series name : FH

2

Series No.: 43B

3

Number of positions : 21to81

4

Contact pitch : 0.2mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.