PIC32MX datasheet(20/48 Pages) MICROCHIP

20 / 48 page

PIC32MX Starter Kit User’s Guide

DS61144D-page 16

2.5

STARTING THE TUTORIAL PROJECT

Click the MPLAB IDE icon on your computer desktop. The MPLAB IDE opens with the

starter kit tutorial project loaded, as shown in Figure 2-7. If the MPLAB IDE does not

have the starter kit tutorial project loaded, select File>Open Workspace... from the

menu bar and browse to the tutorial project file:

[install directory]\PIC32 Starter Kits\

Starter_Kit_Tutorial\starter_kit_tutorial.mcw

(or browse to the file path you used when you installed the MPLAB IDE).

The pane on the left of the MPLAB IDE interface displays project files, the ‘.c’, ‘.h’ and

‘.a’ files that are used to build an application. The project files are organized by type

into folders.

“Starter Kit Found” should be displayed in the “Output” pane of the MPLAB IDE inter-

face. If you do not see this message, select Debugger>Select Tool>PIC32MX Starter

Kit from the menu bar. If that sequence fails to find the project, check the driver

installation, as well as the connections between the hardware and the PC.

FIGURE 2-7:

MPLAB® IDE WORKSPACE

PIC32MX Datasheet(PDF) 20 Page - Microchip Technology