77046 datasheet(1/2 Pages) HONEYWELL

Part #	77046

Description	Extended Duty Pressure Switch With Direct Action Blade Contacts

PDF	2 Pages

Scroll/Zoom	100%

Manufacturer	HONEYWELL [Honeywell Solid State Electronics Center]

Direct Link	http://honeywell.com/Pages/Home.aspx

Logo

1 / 2 page

1.47” REF.

The 5000 Series switch is specifically

designed to stand up to extended duty

applications. This switch is factory set

but capable of field adjustment. It

features a Kapton diaphragm for

compatibility with a wide variety of

fluids, and various terminations

including a Metri-Pack connector that

forms a tight seal when connected.

Among the outstanding design benefits

are its durable construction, compact

size, and enhanced set point integrity.

2.3” REF.

1.47” REF.

5000 Series Switch

with Screw Terminals

5000 Series Switch

with Metri-Pack Terminal

Set Points from 0.5 to 150 psi

5000 Series Extended Duty Pressure Switch With Direct Action Blade Contacts

Switch Boot P/N 79380

for Vacuum and Pressure

NOTE: OPERATING MEDIA (PRESSURE SWITCH)

The pressure switch is designed to operate with air,

motor oils, transmission oils, jet fuels and other similar

hydrocarbon media.

4

Standard Specifications

Type:

Direct action

blade contact

Contacts:

Silver alloy,

gold plated

Set Point:

Factory set

from 0.5 to 150 PSI

Operating Pressure:

150 PSI for 0.5-24 PSI set point range,

250 PSI for 25-150 PSI set point range

Proof Pressure: 500 PSI

Burst Pressure: 750 PSI for 0.5-24 PSI

set point range

1250 PSI for 25-150 PSI

set point range.

Ratings:

Resistive:

15 AMP-

6 VDC

8 AMP-

12 VDC

4 AMP-

24 VDC

Inductive:

1 AMP- 120 VAC

0.5 AMP- 240 VAC

Diaphragm: Polyimide film

Temperature

Range:

-40° F to + 250° F

Connector: 1/8 -27 NPT male thread

Terminals:

#8-32 screws,

1/4” blade,

280 Series Metri-Pack

Circuitry:

SPST-N.O., N.C.,

1 circuit adjustable dual

circuit, or 2 circuits

adjustable dual circuit.

Also available are

N.O./N.O. dual circuit

and N.C./N.C. dual circuit.

Base:

Plated Steel

Cover:

Glass reinforced polyester

Options:

Brass, plastic or stainless

steel base; various base

connector thread sizes;

wire leads (potted & sealed).

2.9” REF.

Similar Part No. - 77046

Manufacturer	Part #	Datasheet	Description
Honeywell Solid State E...	77046	127Kb / 2P	Extended Duty Pressure Switch With Direct Action Blade Contacts
Honeywell Solid State E...	77046	127Kb / 2P	Extended Duty Pressure Switch With Direct Action Blade Contacts
Texas Instruments	7704602CA	574Kb / 12P	CMOS QUAD 2-INPUT NAND SCHMITT TRIGGERS
	7704602CA	978Kb / 17P	CMOS Quad 2-Input NAND Schmitt Triggers
	7704602CA	1,023Kb / 21P	CMOS Quad 2-Input NAND Schmitt Triggers Revised September 2003

More results

Similar Description - 77046

Manufacturer	Part #	Datasheet	Description
Altech corporation	KU325N	2Mb / 14P	Extended/Direct Handle Motor Disconnect Switch
Omron Electronics LLC	A-20G	988Kb / 8P	Snap Action Switch
	SS-01-ED	676Kb / 10P	Snap Action Switch
	SS5GL-13F	598Kb / 8P	Snap Action Switch
Honeywell Solid State E...	77052	127Kb / 2P	Extended Duty Pressure Switch With Direct Action Blade Contacts
Honeywell Solid State E...	79707	127Kb / 2P	Extended Duty Pressure Switch With Direct Action Blade Contacts
Omron Electronics LLC	D4B-1111N	2Mb / 16P	Snap-action contact with certified direct opening operation certification
Omron Electronics LLC	V1141C4	1Mb / 16P	Snap Action Switch
Altech corporation	KU440N	1Mb / 12P	Extended/Direct Handle Motor Disconnect Switch
Highly Electric Co., Lt...	VS10N	947Kb / 3P	SNAP ACTION SWITCH

More results

77046 Datasheet(PDF) 1 Page - Honeywell Solid State Electronics Center

77046 Datasheet(HTML) 1 Page - Honeywell Solid State Electronics Center

Similar Part No. - 77046

Similar Description - 77046

Html Pages

1 2

Datasheet Download

Link URL