Catalog No./Item

Description/Specifications

15A, 125V Single Pole Switch

and Box – Accommodates other

standard single-gang switches in

place of furnished standard single

pole switch. Cover has twistouts

for V500 or V700 on each end.

Twistout on ends permits running

raceway close to interior trim.

Base has 1/2" trade size KOs.

V57242

Utility Box – For use as tee, cross,

pull box, junction box, blank box,

etc. Cover has 1/2" trade size

KO and twistouts for V500 and

V700 on each end and side. End

twistouts permit running raceway

close to interior trim. Base has

1/2" trade size KOs.

Catalog No./Item

Description/Specifications

15A, 125V Duplex Grounding

Receptacle (Nema 5-15R) and

Box – Accommodates other

standard 15A (NEMA 5-15R) or

20A (NEMA 5-20R) duplex devices

in place of furnished duplex

grounding receptacle. Cover has

twistouts for V500 and V700 on

each end and side. End twistouts

permit running raceway close

to interior trim. Base has

1/2" trade size KOs.

Device Box – For shallow type

switches (three-way, single, and

double pole) and receptacles,

(three-wire locking receptacles and

single-gang combination devices).

Base has 1/2" trade size KO.

End twistout permits running

raceway close to interior trim.

4

Catalog No./Item

Description/Specifications

V5786

Adjustable Offset Connector –

V5786 WH

Eliminates offsetting raceway when

connecting to surface type panel

boxes. The adjustment from

surface to center of bushings is

5/8" [15.9mm] minimum to 1 3/8"

[35mm] maximum. Break out

crescent twistout in cover to use

with 700 Series. 1/2" [12.7mm]

chase nipple and locknut furnished.

5790B

Armored Cable Connector

(Galvanized) – For connecting

14/2, 14/3, 12/2, and 12/3 armored

cable to Wiremold fittings. Use a

short piece of V500/V700 raceway

(1 5/8" [41mm] min.) between this

connector and fitting. Not for

connection to 1/2" [12.7mm]

Flex Conduit.

5791

5700 Series Box EMT Connector –

Joins 1/2" [12.7mm] EMT

directly into any V5700 Series

Wiremold box.

Catalog No./Item

Description/Specifications

V2475D

2400 Series Raceway Bridge

Fitting – For allowing 2400

Series Raceway to bridge over

existing installations of

V500/V700 Series Raceway

V4075DA

4000 Series Raceway Bridge

Fitting – For allowing 4000

Series Raceway to bridge over

existing installations of

V500/V700 Series Raceway.

1 3/8"

[35mm]

2 3/8"

[61mm]

2 1/4"

[57mm]

7/8"

[22.2mm]

1"

[25mm]

2"

[51mm]

1 3/4"

[45mm]

8 1/8"

[206mm]

4 3/4"

[121mm]

3 9/16"

[90mm]

NOTE: Use #6 flat head screws with all fittings requiring screws except

V504/V704, and V57200 Series; with V504/V704 use #8 pan

head screws; with V57200 Series use #8 flat head screws.

V500, V700, & 700WH Device Boxes

2"

[51mm]

1 3/8"

[35mm]

4 1/8"

[105mm]

2"

[51mm]

2"

[51mm]

1 3/8"

[35mm]

4 1/8

[105mm]

1 3/8"

[35mm]

4 1/8"

[105mm]

4 5/8"

[118mm]

1 3/8"

[35mm]

2 13/16"

[72mm]

NOTES: Covers on this page have double twistouts. Break out lower twistout for use with V500, and both twistouts for use with V700.

* V5744-2 and V5744S-2 Base and V5747-2 and V5748-2 Base have 1/2" and 1" concentric trade size KOs and a 1 13/16" x 2

7/8" [47mm x 73mm] rectangular KO to permit mounting on a one-gang in-wall outlet box.

†

Larger gangs available, consult factory.