MP62061 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE

MP62061 Rev. 0.91

www.MonolithicPower.com

9

9/23/2009

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2009 MPS. All Rights Reserved.

APPLICATION INFORMATION

Power-Supply Considerations

Over 10μF capacitor between IN and GND is

recommended. This precaution reduces power-

supply transients that may cause ringing on the

input and improves the immunity of the device to

short-circuit transients.

In order to achieve smaller output load transient

ripple, placing a high-value electrolytic capacitor

on the output pin(s) is recommended when the

load is heavy.

OUT

MP62061

1

2, 3

4

5

6, 7, 8

3.3V-5V

USB Ports

FLAG

IN

GND

EN

OFF ON

Figure 3—Application Circuit