PIC16F84A datasheet(166/337 Pages) MICROCHIP

166 / 337 page

PIC16C6X

DS30234D-page 166

Applicable Devices 61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67

16.3

DC Characteristics:

PIC16C61-04 (Commercial, Industrial, Extended)

PIC16C61-20 (Commercial, Industrial, Extended)

PIC16LC61-04 (Commercial, Industrial)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature

-40˚C

≤ TA ≤ +125˚C for extended,

-40˚C

≤ TA ≤ +85˚C for industrial and

0˚C

≤ TA ≤ +70˚C for commercial

Operating voltage VDD range as described in DC spec Section 16.1 and

Section 16.2.

Param

No.

Characteristic

Sym

Min

Typ†

Max

Units

Conditions

Input Low Voltage

I/O ports

VIL

D030

D030A

with TTL buffer

Vss

VSS

0.15VDD

0.8V

For entire VDD range

4.5V

≤ VDD ≤ 5.5V

D031

with Schmitt Trigger buffer

Vss

0.2VDD

D032

MCLR, OSC1 (in RC mode)

Vss

0.2VDD

D033

OSC1 (in XT, HS and LP)

Vss

0.3VDD

Note1

Input High Voltage

I/O ports

VIH

D040

with TTL buffer

2.0

VDD

4.5V

≤ VDD ≤ 5.5V

D040A

0.25VDD

+ 0.8V

-VDD

For entire VDD range

D041

with Schmitt Trigger buffer

0.85VDD

-VDD

For entire VDD range

D042

MCLR

0.85VDD

-VDD

D042A OSC1 (XT, HS and LP)

0.7VDD

-VDD

Note1

D043

OSC1 (in RC mode)

0.9VDD

-VDD

D070

PORTB weak pull-up current

IPURB

250

†

400

µAVDD = 5V, VPIN = VSS

Input Leakage Current (Notes 2, 3)

D060

I/O ports

IIL

±1

µA Vss ≤ VPIN ≤ VDD, Pin at hi-

impedance

D061

MCLR, RA4/T0CKI

±5

µA Vss ≤ VPIN ≤ VDD

D063

OSC1

±5

µA Vss ≤ VPIN ≤ VDD, XT, HS and

LP osc conﬁguration

Output Low Voltage

D080

I/O ports

VOL

0.6

IOL = 8.5 mA, VDD = 4.5V,

-40

°C to +85°C

D080A

0.6

IOL = 7.0 mA, VDD = 4.5V,

-40

°C to +125°C

D083

OSC2/CLKOUT (RC osc conﬁg)

0.6

IOL = 1.6 mA, VDD = 4.5V,

-40

°C to +85°C

D083A

0.6

IOL = 1.2 mA, VDD = 4.5V,

-40

°C to +125°C

The parameters are characterized but not tested.

†

Data in “Typ” column is at 5V, 25

°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC oscillator conﬁguration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C6X be driven with external clock in RC mode.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The speciﬁed

levels represent normal operating conditions. Higher leakage current may be measured at different input volt-

ages.

3: Negative current is deﬁned as current sourced by the pin.

PIC16F84A Datasheet(PDF) 166 Page - Microchip Technology

PIC16F84A Datasheet(HTML) 166 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL