- 4 -

with Adhesive 300LSE

9474LE • 9495LE

Environmental

Performance

Humidity Resistance: High humidity has minimal effect on adhesive performance.

No significant reduction in bond strength is observed after exposure for 7 days at

90°F (32°C) and 90% relative humidity.

UV Resistance: When properly applied, nameplates and decorative trim parts are

not adversely affected by exposure.

Water Resistance: Immersion in water has no appreciable effect on the bond

strength. After 100 hours at room temperature, the high bond strength is maintained.

Temperature Cycling Resistance: High bond strength is maintained after cycling

four times through:

4 hours at 158°F (70°C)

4 hours at -20°F (-29°C)

4 hours at 73°F (22°C)

Chemical Resistance: When properly applied, nameplate and decorative trim parts

will hold securely after exposure to numerous chemicals including oil, mild acids

and alkalis.

Application Ideas

• Foam to powder coated painted surfaces.

• Low surface energy plastic adhesion.

Storage

Store in original cartons at 70°F (21°C) and 50% relative humidity.

Shelf Life

If stored under proper conditions, product retains its performance and properties for

two years from date of manufacture.

Application Equipment

To apply adhesives in a wide web format, lamination equipment is required to

ensure acceptable quality. To learn more about working with pressure-sensitive

adhesives please refer to technical bulletin, Lamination Techniques for Converters

of Laminating Adhesives (70-0704-1430-8).

For additional dispenser information, contact your local 3M sales representative, or

the toll free 3M sales assistance number at 1-800-362-3550.