L13 datasheet(37/42 Pages) RENESAS

37 / 42 page

QB-RL78L1C In-Circuit Emulator

CHAPTER 4

CAUTIONS

R20UT2703EJ0200

Rev.2.00

Page 37 of 42

Jan 31, 2014

- Capacitor which is mounted on user system when LCD controller/driver is used

The following capacitors are mounted on QB-RL78L1C internal circuit.

Because of this, terminal characteristic on QB-RL78L1C is slightly different from target device.

Mounting point:

Between VL1 and GND terminals, Between VL2 and GND terminals,

Between VL3 and GND terminals, Between VL4 and GND terminals,

Between CAPH and CAPL terminals

Mounted condenser capacity: 0.1uF

- LCD controller/driver behavior

When executing STOP instruction or an instruction which stops the main system clock (fMAIN) with setting the

main system clock (fMAIN) to an operation clock of LCD controller/driver, LCD controller/driver stops execution

on target device. On the other hand, it continues execution on QB-RL78L1C.

- Port function of pin LCD alternate function pin

When using LCD alternate function pin as port function, pin status becomes high impedance for 6.5 ms after the

port mode register (PMn) setting and the LCD port function register (PFSEGm) setting.

Remark m = 0 to 6,

n = 0 to 3, 5, 7, 12, 14

L13 Datasheet(PDF) 37 Page - Renesas Technology Corp