1

RJ-11 DIMENSIONS In inches (mm)

RJ ADAPTERS & CABLES

Bulletin No. DRRJ-C

Drawing No. LP0554

Released 7/03

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion-controls.com

DRRJ11T6 and DRRJ45T8 Connector to Terminal Adapters

MODEL

DESCRIPTION

PART NUMBER

CBJ

CBL

DRRJ

RJ-12 to RJ-12 10' Cable

RJ-45 to RJ-45 6" Jumper Cable

RJ-45 to RJ-45 10' Cable

RJ-45 Connector to Terminal Adapter

RJ-12 to RJ-12 1' Cable

RJ-45 Parallel Connector

RJ-11 to RJ-11 6" Jumper Cable

RJ-45 to RJ-45 1' Cable

RJ-11/12 Connector to Terminal Adapter

CBLRLC02

CBLRLC07

CBLRLC04

DRRJ45T8

CBLRLC01

DRRJ45P6

CBJ11BD5

CBLRLC03

DRRJ11T6

ORDERING INFORMATION

APPLICATION EXAMPLES

RS485 via RJ-11 connector and DRRJ11T6

Product Examples: DLC, IAMS, ITMS, and PAX.

A Red Lion Controls device with an RS485 RJ-11 port is connected to the

DRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is then

wired to run the RS485 MODBUS serial information to another device.

A Red Lion Controls device with an RS232 RJ-12 port is connected to the

DRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminal

block is then wired to run the RS232 serial information to another device.

RS232 via RJ-12 connector and DRRJ11T6

Product Examples: G3, Modular Controller, and Paradigm (CL,

CX, GL, TX, and VX)

DESCRIPTION

These adapters convert modular RJ-style connectors to terminal

block connectors, providing a rugged means by which standard

shielded cabling can be used in lieu of flat, unshielded cable. The

DRRJ11T6 can be used with RJ-11 or RJ-12 cables, while the

DRRJ45T8 can be used with RJ-45 connectors. The adapters are

designed to mount on any standard DIN rail.

Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14

to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for the

screw-terminals correspond directly to the terminal pin out of the RJ

connector. There is an extra terminal on each block labeled “S” for the

connection of shields.