IO10PDB0V0 datasheet(196/197 Pages) MICROSEMI

196 / 197 page

Datasheet Categories

Categories

In order to provide the latest information to designers, some datasheet parameters are published before

data has been fully characterized from silicon devices. The data provided for a given device, as

highlighted in the "SmartFusion cSoC Device Status" table on page III, is designated as either "Product

Brief," "Advance," "Preliminary," or "Production." The definitions of these categories are as follows:

Product Brief

The product brief is a summarized version of a datasheet (advance or production) and contains general

product information. This document gives an overview of specific device and family information.

Advance

This version contains initial estimated information based on simulation, other products, devices, or speed

grades. This information can be used as estimates, but not for production. This label only applies to the

DC and Switching Characteristics chapter of the datasheet and will only be used when the data has not

been fully characterized.

Preliminary

The datasheet contains information based on simulation and/or initial characterization. The information is

believed to be correct, but changes are possible.

Production

This version contains information that is considered to be final.

Export Administration Regulations (EAR)

The products described in this document are subject to the Export Administration Regulations (EAR).

They could require an approved export license prior to export from the United States. An export includes

release of product or disclosure of technology to a foreign national inside or outside the United States.

Microsemi SoC Products Group Safety Critical, Life Support,

and High-Reliability Applications Policy

The SoC Products Group products described in this advance status document may not have completed

the SoC Products Group’s qualification process. Products may be amended or enhanced during the

product introduction and qualification process, resulting in changes in device functionality or

performance. It is the responsibility of each customer to ensure the fitness of any product (but especially

a new product) for a particular purpose, including appropriateness for safety-critical, life-support, and

other high-reliability applications. Consult the SoC Products Group’s Terms and Conditions for specific

liability exclusions relating to life-support applications. A reliability report covering all of the SoC Products

Group’s products is available on the SoC Products Group website at:

http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131372.

Microsemi SoC Products Group also offers a variety of enhanced qualification and lot acceptance

screening procedures. Contact your local SoC Products Group sales office for additional reliability

information.

IO10PDB0V0 Datasheet(PDF) 196 Page - Microsemi Corporation