TRXNFEMM datasheet(2/5 Pages) OPLINK

2 / 5 page

Oplink Communications, Inc.

Transmitter Performance Characteristics (Over Operating Case Temperature, V

CC = 3.13 to 3.47V)

Receiver Performance Characteristics (Over Operating Case Temperature, V

CC = 3.13 to 3.47V)

TRXNFEMM

All parameters guaranteed only at typical data rate

Parameter

Symbol

Minimum

Typical

Maximum

Units

Operating Data Rate 1

125

Mb/s

Optical Output Power 2

- 19.0

- 16.0

- 14.0

dBm

Center Wavelength 3

1270

1380

Spectral Width (FWHM) 3

Δλ

FWHM

140

Optical Rise/Fall Time (10% to 90%) 3

r, tf

0.6

3.0

Extinction Ratio

hi/Plo

Optical Output Power of OFF Transmitter

OFF

- 45.0

dBm

Duty Cycle Distortion Jitter (peak-to-peak)

DCD

1.0

Data Dependent Jitter (peak-to-peak)

DDJ

0.6

Random Jitter (peak-to-peak) 4

0.76

Transmitter Output Eye 5

Typically compliant with OC-3/STM-1 eye mask (GR-253-CORE

and G. 957) without filter, but not guaranteed and not tested for.

Data rate ranges from 50Mb/s to 266Mb/s. However, some degradation may be incurred in overall performance.

Measured average power coupled into 62.5/125μm, 0.275 NA graded-index multimode fiber. The minimum power specified is at Beginning-of-Life.

The Center Wavelength, Spectral Width and Optical Rise/Fall Time satisfy the trade-off curves in FDDI PMD document as shown in Figure 1.

Defined as 12.6 times the rms value per FDDI PMD.

Compliance with the Optical Pulse Envelope in FDDI PMD is not specified and is not claimed.

Parameter

Symbol

Minimum

Typical

Maximum

Units

Operating Data Rate 1

125

Mb/s

Minimum Input Optical Power (2.5x10-10 BER) 2

min

- 32.5

- 34.5

dBm

Maximum Input Optical Power (2.5x10-10 BER) 2

max

- 14.0

dBm

LOS Thresholds

Increasing Light Input

los+

los- + 1.5dB

- 32.5

dBm

Decreasing Light Input

los-

- 45.0

LOS Hysteresis

1.5

LOS Timing Delay

Increasing Light Input

t_loss_off

100

µs

Decreasing Light Input

t_loss_on

350

Contributed Duty Cycle Distortion Jitter (peak-to-peak)

DCD

0.4

Contributed Data Dependent Jitter (peak-to-peak)

DDJ

1.0

Contributed Random Jitter (peak-to-peak) 3

2.14

Wavelength of Operation

1100

1600

Data rate ranges from 50Mb/s to 266Mb/s. However, some degradation may be incurred in overall performance.

Specified in average optical input power and measured with 223-1 PRBS at 125Mb/s and 1310nm wavelength with optical input rise/fall time of 2.5ns

and optimum sampling.

Defined as 12.6 times the rms value per FDDI PMD.

RevA-PN.2009.06.25

Laser Safety: All transceivers are Class I Laser products per

FDA/CDRH and IEC-60825 standards. They must be oper-

ated under specified operating conditions.

Oplink Communications, Inc.

DATE OF MANUFACTURE:

This product complies with

21 CFR 1040.10 and 1040.11

Meets Class I Laser Safety Requirements

TRXNFEMM Datasheet(PDF) 2 Page - OPLINK Communications Inc.

TRXNFEMM Datasheet(HTML) 2 Page - OPLINK Communications Inc.

Html Pages

1 2 3 4 5

Datasheet Download

Link URL