LP5522TMSLASHNOPB datasheet(7/17 Pages) TI1

7 / 17 page

LP5522

www.ti.com

SNVS488 – JUNE 2007

LED Driver Typical Performance Characteristics

TJ = 25°C. Unless otherwise noted, typical performance characteristics apply to the LP5522 Block Diagram with: VIN = 3.6V,

RISET = 24 kΩ, CIN = 100 nF.

Output Current vs RISET (Expanded Range)

Output Current vs RISET

Output Current vs Input Voltage

(ISET Connected To VDD)

Output Current vs Headroom Voltage

Line Regulation

LED Startup

Control Interface Operational Description

LP5522 has one digital control input, CTRL. Threshold levels of CTRL input are fixed to enable control from low

voltage controller. CTRL signal is used to control the mode of the circuit. A rising edge of the CTRL signal

activates the circuit and starts a command entering period. During the command entering period all rising edges

are counted. After command entering period there is a blank period when no rising edges are allowed. If CTRL is

left high after command entering period, the consequent command is performed right after the blank period.

Note that timing diagrams are not on scale!

Submit Documentation Feedback

Product Folder Links: LP5522

LP5522TM/NOPB Datasheet(PDF) 7 Page - Texas Instruments