is removed and replaced with a fresh one

Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS

power to connected equipment

Specifications

OVERVIEW

PDU Type

Hot-Swap

OUTPUT

Output Watt Capacity (watts)

2300

Output Capacity Details

2.1kW (208V input), 2.2kW (220V input), 2.3kW (230V input), 2.4kW (240V input), 2.0kW (200V input); 10A

maximum

Frequency compatibility

50 / 60 Hz

Output nominal voltage

200-240V nominal, single phase

Outlet quantity / type

8 C13 outlets support critical connected loads; 1 designated pass-through C13 outlet supports C14 input plug from

UPS

Outlet Type

IEC-C13

INPUT

PDU Input Voltage

200; 208; 220; 230; 240

Maximum Input Amps (A)

10

Input connection type

UTILITY & UPS inputs are available from separately labelled C14 inlets, compatible with included C13-C14

interconnect cables or with compatible user-supplied cabling

PDU Plug Type

IEC-320 C14

Input cord length (ft.)

6

Input cord length (m)

1.83

Phase

Single-Phase

LEDS ALARMS & SWITCHES

Switches

Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6

milliseconds

Front panel LEDs

Lighted indicators confirm UPS and Utility switch position and operating mode

PHYSICAL

Shipping Dimensions (HWD/in)

9.84 x 22.75 x 9.44

Shipping Dimensions (HWD/cm)

25 x 57.8 x 24

Shipping weight (lbs)

11

Shipping weight (kg)

5

2 / 4