© API Technologies Corp. Proprietary Information

|

www.apitech.com

|

micro.apitech.com

|

+1.888.553.7531

|

MicrowaveSales@apitech.com

Page #

Rev Date: 8/26/2014

2

Model: QBS-610

Outline Drawing

Notes

1.

Specification ratings are based on measurements in a 50 ohm system.

2.

Damage may occur at input levels above +8dBm.

3.

Adjustable via external set screw.

4.

Valid for output power levels below AGC threshold.

5.

Power level measured at RF output connector.

6.

Measured with input power level of -20 dBm.

7.

Measured across entire frequency band under all gain/output power conditions.

8.

Measured across any 120MHz band under all gain/output power conditions.

9.

All set screws adjusted to nominal values with power levels up to -13dBm.

10.

Alternate DC power supply voltages available as a custom solution.

11.

Normal operating state is a low impedance contact (collector) capable of sinking up to 10 mA.

D-SUB Interface (Detail A)

Pin

Input / Output

1

+28 VDC

2

+28 VDC Return

3 – 5

Spares

6

AGC Bypass

7

AGC Bypass Return

8

Summary Fault Indicator

9

Summary Fault Indicator Return