5/8/2014

2

Model # QBS-611

Outline Drawing

Notes

1.

Specification ratings are based on measurements in a 50 ohm system.

2.

Damage may occur at input levels above +8dBm.

3.

Adjustable via external set screw.

4.

Valid for output power levels below AGC threshold

5.

Power level measured at output connector.

6.

Measured with input power level of -20 dBm.

7.

Measured across entire frequency band under all gain/output power conditions.

8.

Measured across any 120MHz band under all gain/output power conditions.

9.

All set screws adjusted to nominal values with power levels up to -13dBm.

10.

Alternate DC power supply voltages available as a custom solution.