SmartPro 230V 2.2kVA 1.6kW Line-Interactive UPS,

Tower, SNMP, Webcard, USB, DB9 Serial

MODEL NUMBER: SMARTINT2200VS

Description

Tripp Lite's SMARTINT2200VS intelligent, line interactive tower uninterruptible power supply (UPS) prevents

data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges.

Large internal batteries offer 19 minutes half load runtime and 7 minutes at full load. Maintains regulated 230V

nominal output without using battery power during brownouts and overvoltages from 151 to 282V. 2200VA

power handling capability offers compatibility with a variety of networking, telecom and other sensitive electronic

applications. Includes a total of 9 outlets with 3 load banks (2 outlets each) that are individually switchable via

software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports

simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and

unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off

(EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and

set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage

and performance problems resulting from transient surges and line noise. Attractive gray color scheme.

Features

SMARTINT2200VS line interactive UPS offers protection from blackouts, brownouts, overvoltages and surges

2200VA / 1600 watt capacity

Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes

Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V

Includes 9 UPS supported outlets with 3 individually controllable load banks that can be powered off and back on again via software interface

IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

PowerAlert UPS monitoring and unattended shutdown software included

Offers simultaneous monitoring by up to 4 directly-connected devices through included USB and DB9 interface ports, or the monitoring by any number of

additional servers over IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery

voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Highlights

2.2kVA / 2200VA line interactive

tower UPS system

230V nominal output during

brownouts to 151 and

overvoltages to 282V

Front panel status LEDs with

load and battery capacity level

display

USB, RS232, EPO and optional

SNMP/Web interface; 3 switched

load banks

C20 inlet; 8 C13 & 1 C19 outlets;

2 C13 to C14 cables included

Package Includes

SMARTINT2200VS UPS System

PowerAlert software with USB

and DB9 cables

Cable for Emergency Power Off

interface

Instruction manual with warranty

information

C13 to C14 power cables (3)

1 / 5