| Electronic Components Datasheet Search |
|
AN2173 Datasheet(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2173 Datasheet(HTML) 1 Page - STMicroelectronics |
|
1 / 15 page ![]() Rev 1.0 November 2005 1/15 15 Introduction This application note describes a power supply that can be used as a wall transformer replacement or as a power module for a small consumer appliance. The design objectives are: ■ The outside case dimensions (in inches) are 2L x 2W x 1H, with smaller inside dimensions, ■ the Line and Neutral pins (of equal size and 8mm from the end of the assembly) are attached to the case, ■ the input voltage ranges are 95VAC to 135VAC; and 190VAC to 270VAC, ■ the output voltage is 15V (max) at 1mA (min) and is 12V (min) at 500mA (max), with a 50% duty cycle, ■ the ambient temperature range is –5°C to 55°C, and ■ the Electromagnetic Interference (EMI) is measured for all loads. The power supply for the wall transformer replacement application consists primarily of a re-packaged VIPer12 Demonstration Board (12V, single output voltage, see Application Note AN1734 for details). Figure 1. VIPer12-based Power Supply Assembly, Top View AN2173 APPLICATION NOTE Using a VIPer12-based Power Supply to Replace a Wall Transformer http:/www.st.com |
Similar Part No. - AN2173 |
|
Similar Description - AN2173 |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |