UM0723 datasheet(26/48 Pages) STMICROELECTRONICS

26 / 48 page

Hardware setting of the STEVAL-IHM023V2

UM0723

26/48

Doc ID 15870 Rev 4

4.2

Hardware settings for “Field Oriented Control” (FOC) in

single-shunt topology current reading configuration

To drive any motor, the user must ensure that:

●

The motor control demonstration board is driven by a control board that provides the

six output signals required to drive the three-phase power stage

●

The motor is connected to the J2 motor output connector

●

If using an encoder or Hall sensor connection, it is connected to connector J4

●

If using a tachometer connection, it is connected to connector J8

●

If using the brake control feature, connect a dissipative power load to J6 connector

Table 4 below shows the jumper settings for any high-voltage motors in single-shunt FOC

configuration. Please confirm that the demonstration board input voltage is in the range of

125 VDC to 400 VDC or 90 VAC to 285 VAC. If the voltage doubler is applied, the input

voltage must be in the range of 65 VAC to 145 VAC.

Table 4.

Jumper settings for high-voltage PMAC or generic AC motor in single-

shunt FOC control

Jumper

Jumper settings for FOC of HV PMSM, BLDC or AC IM in single-shunt

configuration for current reading

“3.3 V” position for VDD = 3.3 V

“5 V” position for VDD = 5 V

“HIGH VOLTAGE” position

Present for Hall sensor or encoder

Not present for connected tachometer

“R_BRAKE” position for software handling of resistive brake (if any)

“OCP OFF” position for software handling of overcurrent protection disabling

Present for supplying control stage from IHM023v2 connector with VDD (max. 50

mA)

Present for connected tachometer

Not present for connected Hall sensor or encoder

Single-shunt

W10

Present

W11

Dash mark position

W13

Single-shunt

W14

Not present

W16

Dash marked position for supplying of Hall/encoder with VDD

Not marked position for supplying of Hall/encoder with +5 V

UM0723 Datasheet(PDF) 26 Page - STMicroelectronics

UM0723 Datasheet(HTML) 26 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Datasheet Download

Link URL