8/19

STR71X CLOCK CONFIGURATIONS EASY SETUP

6 TIM

In this calculation sheet, it is necessary to select the clock source (internal or external), to se-

lect the external clock edge if external clock was selected, and to configure the needed pres-

caler. We obtain as a result the counter input frequency and the TIM period.

This sheet shows how to configure the different registers to:

■

Enable/Disable the Timer Counter,

■

Setting the operation mode of the Timer,

■

Setting the Input Capture edge,

■

Setting the Output Compare function,

■

Setting the Output Compare signal Level,

■

Enable the Output Compare signals.

Figure 7. TIM calculation sheet

As an example, as shown in Figure 7, this calculation sheet shows how to configure the TIM

as follows: