DocID027388 Rev 3

11/16

TN1206

Carrier tape mechanical dimensions

15

5.2

Carrier tape width > 24 mm

Possible widths are 32 and 44 mm (refer to Table 1: QFP packages available in tape and

reel packing).

Figure 6. Embossed carrier tape (width > 24 mm)

Table 4. Carrier tape variable dimensions (width ≤ 24 mm)

Tape

width

B1

E2

F

P1

T2 max.

W max.

A0, B0, K0

Unit

16 mm

12.1

14.25

7.5±0.1

12.0±0.1

8.0

16.3

mm

24 mm

20.1

22.25

11.5±0.1

16.0±0.1

12.0

24.3

1. The cavity defined by A0, B0 and K0 surrounds the component with sufficient clearance so that:

- The component does not protrude above the top surface of the carrier tape.

- The component can be removed vertically from the cavity without mechanical restriction, after the top cover tape has

been removed.

- Rotation of the component is limited to 20° maximum for 12 mm tapes and to 10° maximum for 16 mm and 24mm tapes.

- Lateral movements of the component are restricted to 1.0 mm maximum for 16 mm and 24 mm tapes.