malfunction of LED, the single content of Bromine element is required to be less than

900PPM,the single content of Chlorine element is required to be less than 900PPM,the total

content of Bromine element and Chlorine element in the external glue of the application products

is required to be less than 1500PPM.

在使用外封胶涂抹LED产品时，应确保外封胶与LED封装胶水相匹配，因为大多数LED

的封装胶水为硅胶，它有较强的氧化性和较强的吸湿性，必须防止外封材质进入LED内部

以造成LED的损伤，单一的溴元素含量要求小于900PPM，单一氯元素含量要求小于

900PPM，在涂抹LED产品时要求外封胶溴元素与氯元素总含量必须小于1500PPM。

5. To ensure the quality of our LEDs, So please do not put pressure on the LEDs.

为确保LED的可靠性，在操作过程中不可施加压力在LED器件胶体表面。

√

正确

Part No./型号:PLCC2LW6 CT

SMD SPECIFICATION

Hebei I.T. (Shanghai) Co., Ltd.

Http：

Page 12 of 12

// www.ledz.com