AMC7823IRTAT datasheet(2/55 Pages) TI

2 / 55 page

AMC7823

SLAS453F – APRIL 2005 – REVISED MARCH 2012

www.ti.com

DESCRIPTION (CONTINUED)

The AMC7823 has an internal programmable reference (+2.5V or +1.25V), and an SPI serial interface. An

external reference can be used as well. Typical power dissipation is 100mW. The analog input range is 0V to

+5V, and the analog output range is 0V to +2.5V or 0V to +5V. The AMC7823 is ideal for multichannel

applications where low power and small size are critical. The AMC7823 is available in a 40-lead QFN package

and is fully specified over the –40°C to +85°C temperature range.

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE/ORDERING INFORMATION(1)

PACKAGE-

SPECIFIED

LEAD

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT

PRODUCT

(DESIGNATOR)

RANGE

MARKING

NUMBER

MEDIA, QUANTITY

AMC7823

AMC7823IRTAT

Tape and Reel, 250

AMC7823

QFN-40 (RTA)

–40°C to +85°C

AMC7823

AMC7823IRTAR

Tape and Reel, 2000

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)

Over operating free-air temperature range, unless otherwise noted.

PARAMETER

AMC7823

UNIT

AVDD, DVDD, BVDD to GND

–0.3 to +6

Digital input voltage to GND

–0.3 to BVDD + 0.3

Analog input voltage to GND

–0.3 to AVDD + 0.3

Input current, continuous

±20

Input current, momentary

±100

Operating temperature range

–40 to +105

°C

Storage temperature range

–65 to +150

°C

Junction temperature range (TJ max)

+150

°C

Power dissipation

(TJ max – TA) / θJA

θJC

°C/W

Thermal impedance

θJA

°C/W

(1)

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute

maximum conditions for extended periods may affect device reliability.

Submit Documentation Feedback

Product Folder Link(s): AMC7823

AMC7823IRTAT Datasheet(PDF) 2 Page - Texas Instruments

AMC7823IRTAT Datasheet(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Datasheet Download

Link URL