MCP2510-EST datasheet(16/76 Pages) MICROCHIP

16 / 76 page

MCP2510

DS21291C-page 16

Preliminary

 2000 Microchip Technology Inc.

of a message has begun, if an error occurs on the bus

or if the message loses arbitration, the message will be

retransmitted regardless of a request to abort.

FIGURE 3-1:

Transmit Message Flowchart

Start

CAN Bus available

to start transmission

Examine TXBNCTRL.TXP <1:0> to

Are any

TXBNCTRL.TXREQ

bits = 1

The message transmission

sequence begins when the

device determines that the

TXBNCTRL.TXREQ for any of

the transmit registers has been

set.

Clear:

TXBNCTRL.ABTF

TXBNCTRL.MLOA

TXBNCTRL.TXERR

Yes

TXBNCTRL.TXREQ=0

CANCTRL.ABAT=1

Clearing the TxBNCTRL.TXREQ

bit while it is set, or setting the

CANCTRL.ABAT bit before the

message has started transmission

will abort the message.

Transmit Message

Was

Message Transmitted

Successfully?

Yes

Set TxBNCTRL.TXREQ=0

CANINTE.TXnIE=1?

Generate

Interrupt

Yes

Set

Did

a message error

occur?

Was

Arbitration lost during

transmission?

Set

TxBNCTRL.TXERR=1

Yes

Determine Highest Priority Message

Set

TxBNCTRL.MLOA=1

The CANINTE.TXnIE bit

determines if an interrupt

should be generated when

a message is successfully

transmitted.

GOTO START

CANTINF.TXNIF=1

Yes

MCP2510-EST Datasheet(PDF) 16 Page - Microchip Technology

MCP2510-EST Datasheet(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Datasheet Download

Link URL