| Electronic Components Datasheet Search |
|
SEC2410 Datasheet(PDF) 49 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
SEC2410 Datasheet(HTML) 49 Page - Microchip Technology |
|
49 / 283 page ![]() 2013 - 2014 Microchip Technology Inc. DS00001587C-page 49 SEC2410/SEC4410 8.2.3 GPIO MUXING TABLE TABLE 8-14: UTILITY CONFIGURATION REGISTER 1 UTIL_CONFIG1 (0x080A RESET=0x00) Utility Configuration Register 1 Bit Name R/W Description 7:3 Reserved R Always read ‘0’ 2 SPI_DISABLE R/W After reset the SPI interface is always enabled. If the firmware does not detect a SPI rom externally, it sets this bit. This disable the SPI interface, and enables GPIOs. 1 UART_ENABLE R/W This bit enables the UART pins. 0 - GPIOs go to GPIO pins 1 - The UART TX and RX go the GPIO11,12. 0 Reserved R Always read ‘0’ TABLE 8-15: PIN MUX SELECT REGISTER PIN_MUX_SEL (0x080C RESET=0x00) Pin Mux Select Register Bit Name R/W Description 7 SC_LED_SEL R/W Pin LED0 / SC_LED_ACT_N function selected with this bit: ‘0’ = LED controlled from GPIO0 / LED0 ‘1’ = LED controlled by Smart Card interface Note: Please see LED0_GPIO0_CTL for details of using gpio versus LED 6 SD2_GPIO_EN R/W Setting this bit enables the GPIOs that are multiplexed with the second SecureDigital interface: GPIO17, GPIO18, GPIO19, GPIO20, GPIO21, GPIO22, GPIO23, GPIO24, GPIO25, GPIO26 Note: GPIO16, is always a GPIO, and is not affected by this bit. 5 SD2_HI_GPIO EN R/W Setting this bit enables the four GPIOs that are multiplexed with the upper four data bits of the second SecureDigital interface: GPIO22, GPIO23, GPIO24, GPIO25 This bit has no effect if SD2_GPIO_EN is set. 4 SC_GPIO_EN R/W Setting this bit enables the five GPIOs that are multiplexed with the SmartCard interface: GPIO27, GPIO28, GPIO29, GPIO30, GPIO31 3:0 MUX_SEL R/W The single Flash Media is selected with the following values: 0001 Reserved 0010 Reserved 0100 Reserved 1000 Secure Digital TABLE 8-16: GPIO MUXING TABLE Name Hardware Mux Mux Control bit SW GPIO Function Comment GPIO0 CR_ACTIVTY/ LED0 LED0_GPIO_CTL Unassigned GPIO1 SC_LED_ACT_N/ LED1 LED1_GPIO_CTL & LED_CTL Unassigned GPIO2 SPI_DI SPI_DISABLE Unassigned |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |