2004-03-16

Page 17

BSP 742 RI

Package and ordering code

all dimensions in mm

Package:

Ordering code:

P-DSO-8-6

Q67060-S7304-A2

Printed circuit board (FR4, 1.5mm thick, one

layer 70µm, 6cm2 active heatsink area ) as

Published by

Infineon Technologies AG,

St.-Martin-Strasse 53,

D-81669 München

© Infineon Technologies AG 2001

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee

of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,

regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your

nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide

(see address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the

types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express

written approval of Infineon Technologies, if a failure of such components can reasonably be expected to

cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device

or system. Life support devices or systems are intended to be implanted in the human body, or to support

and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health

of the user or other persons may be endangered.