If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Supply Voltage

6V

Output Current

30 mA

Maximum Junction Temperature

+125˚C

Storage Temperature Range

−65˚C to +150˚C

Lead Temperature

(Soldering 10 seconds)

+300˚C

ESD Rating (Human Body Model)

1000V

Package Thermal Resistance

θ

125˚C/W

θ

105˚C/W

Reliability Information

Transistor count

72

MTTF

254 Mhr

Recommended Operating

Conditions

Supply Voltage Range (V

+4.5V to +5.5V

Parameter

Condition

Typ

+25˚C

Min/Max

+25˚C

Min/Max

0˚C to

+70˚C

Min/Max

-40˚C to

+85˚C

Units

STATIC DC PERFORMANCE

Supply Current, Loaded

150

(Notes 5, 7)

37

-

-

-

mA

Supply Current, Unloaded

(Note 3)

34

28/37

26/39

26/39

mA

Output HIGH Voltage (V

(Note 3)

−1.7

−2.0/1.4

−2.0/1.4

−2.0/1.4

V

Output LOW Voltage (V

(Note 3)

−3.7

−4.0/3.4

−4.0/3.4

−4.0/3.4

V

Input Bias Current

(Note 4)

10

30

50

50

µA

Output Swing

R

2.0

1.86/2.14

1.86/2.14

1.86/2.14

V

Output Swing

R

1.30

-

-

-

V

Common Mode Input Range Upper Limit

−0.7

−0.8

−0.8

−0.8

V

Common Mode Input Range Lower Limit

−2.6

−2.5

−2.5

–2.5

V

Minimum Differential Input Swing (Note 5)

200

200

200

200

mV

Power Supply Rejection Ratio (Note 3)

26

20

20

20

dB

AC PERFORMANCE

Output Rise and Fall Time

(Notes 3, 6, 7)

650

425/825

400/850

400/850

ps

Overshoot

(Note 5)

5

%

Propagation Delay

(Note 5)

1.0

ns

Duty Cycle Distortion

(Note 5)

50

ps

Residual Jitter

(Note 5)

25

-

-

-

ps

pp

MISCELLANEOUS PERFORMANCE

Input Capacitance

(Note 5)

1.0

pF

Output Resistance

(Note 5)

10

Ω

Output Inductance

(Note 5)

6

nH

Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices

should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.

Note 2: Min/Max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined

from tested parameters.

Note 3: Spec is 100% tested at +25˚C, sample tested at +85˚C.

Note 4: Spec is 100% tested at +35˚C at wafer probe.

Note 5: Spec is guaranteed by design.

Note 6: Measured between the 20% and 80% levels of the waveform.

Note 7: Measured with both outputs driving 150

Ω, AC coupled at 270 Mbps.

3

www.national.com